CF 531

With an 88 mm knife cutting radius, 2- or 4-knife cutterblock and the unique Felder system cutterblock technology, the planed finish reaches a new higher level!
Fifteen years ago, Felder introduced the double-sided disposable planer knife system. After each cutterblock knife change, start again with perfectly adjusted machine edged planer knives. Its much faster and more economical than the standard system.
Its mere child’s play to change the planer knives. In less than a few minutes you can change either the 2- or 4-knife cutterblock. The sharp Felder planer knives are instantly ready for action!

The high speed
router ­spindle

is designed for router shaft diameters of
Ø 6–16 mm and a speed of 16,000 rpm.

The Felder-system cutterblock: 2- or 4-knife cutterblock, Quick and effortless knife change, Self aligning knives are perfectly set each and every time! , No resin buildup on clamping bolts, Extremely quiet operation due to the enclosed design, Excellent durability of knife edges, Cost savings due to the 2 sided
low cost knives

The planer fence may be tilted to any angle between 90° and 45°. End stops are placed at 90° and 45°.

A space saving solution with optimum ergonomics: Planer tables tilt away from the user operating area, this ensures working with your Felder is as userfriendly as possible and also requires less workshop space.

The horizontal mortiser The horizontal mortiser is mounted on the planer side. An optional ­dowelling device can be added to increase the mortiser capability.

Stable and compact saw unit built to last:
- Cutting height 102 mm with
a 315 mm saw blade
- Double-sided support
- Smooth tilting action 0°–45°
- Support close to the saw blade on both sides

“X-Roll”, making a difference:
- Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact between bearings and guiding track, maximising precision over the lifetime of the machine. A 3 way dust protection system ensures clean, dust free guide rails. This is obtained through silicon wipers, brushes and concave tracks. Your X-Roll sliding table guidance system is backed by a 6 year factory guarantee.
- Clean, dust-free gui­de rails thanks to special silicon wipers.
- Hardened-steel tracks ensure accuracy and durability.
- 6 year guarantee.

The crosscut fence 1300 mm for crosscuts between +45° and –45° with 90° positive stop. The fence is quickly mounted onto the “X-Roll“ sliding table without the use of tools. The large crosscut stop provides an exact 90° position.

The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.

Stable and compact spindle unit for long lasting precision:
- 100 mm maximum above table operating height
- 180 mm cast iron table opening
- 4 speeds 3000, 6000, 8000 and 10,000 rpm
- 14,000 rpm high speed router spindle in place of the shaper spindle.
(must be ordered before the machine is produced).
- Smooth rearward tilt from
0° to 45°
- Height adjustment with cast iron segment

For the professional processing of sheet material the saw can be equipped with the independently adjustable scoring unit.

“220” spindle moulder fence for max. tooling diameter 220 mm

- Safety, since there is no pinch point.
- Suitable for any workpiece size
- Problem-free power feeder application
- Impeccable machined
surface
- Optimal chip removal

The Felder 500 Series saw unit is fully compatible with Dado tooling. Thanks to a removable table insert and flanges, specialised Felder dado tooling can be used.