Constructed completely out of cast iron, the new Felder 700 Series saw unit represents a new era of running stability and efficiency.
104 mm cutting height with a 315 mm saw blade
operates with groover up to 19.5 mm
Electrical height adjustment with LED display
Zero point tilt
Large dimensioned saw arbor with double bearing seats
Maximum energy transfer with the large Poly-V belt ­bearing area
Optimal extraction with the completely enclosed, below table extraction system
Precise height adjustment via precision linear guides
High precision double-sided support system
Tilt segment “Easy-Glide”:
- High durability
- Play-free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. This combination results in an almost perfect transmission of power to the saw blade.

The Felder 700 Series saw unit is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.

The crosscut fence 1100 mm for crosscuts between +45° and –45°. The fence can be attached to the sliding table without the use of tools. The end stop provides you with the exact 90° position.
The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.
The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This means the crosscut fence stop remains firmly in place, especially useful when crosscutting pre-mitred workpieces.

The 2600 mm long telescopic crosscut fence can be effortlessly adjusted from 90° to 45°. A mitre scale on the outrigger table allows for accurate adjustments. On request, we will fit your outrigger table with the precision mitre pin locating system. Locate your mitre angles accurately time and again!

Settings with an accuracy to a tenth of a millimetre can be obtained using the electronic digital display incorporated in the parallel cutting fence. Option

The outrigger table “1300” comes as standard on S-Professional models. The workpiece roller at the end of the outrigger assures an easy loading process. The telescopic fence can be positioned as desired from 90 to 45 degrees. For those who require even more support surface, there is the optional upgrade to the “1500” outrigger at no additional cost.

The “precision mitre index system” on the outrigger table of the professional model allows you to freely select preset positioning stops at increments of 5°, but also at 22.5°, by means of the index locating pin from +45° to –45°.

The scoring unit for cuttings in plastic laminated panels without tear outs. Backlash free height and lateral adjustment of the scoring saw blade, drive power of the industrial scoring unit 1.0 HP.

The Felder precision sliding table has been designed to accept maximum loads while retaining its smooth operation and accuracy. The “Monoprofile“ of the sliding table and base guarantees maximum ­torsional strength at every temperature. Through the “X“ formation of the roller bearings the load is optimally distributed to all sides. The “X-Roll“ guiding system and other numerous outstanding details are patented. Such precision and technology earns the right to the status of “World Class“.

The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.

“Power-Drive” gives you electronic height adjustment on the saw blade. Turn the control knob to adjust the blade height, displayed on a red LED display.

On request, we can equip your “700 Series“ with start buttons located directly on the sliding table to turn on the main and scoring blades. How about that for convenience!

The rip capacity comes at 800 mm or optional 1250 mm. The rip fence almost hovers over the table. The single handed quick clamping and fine adjusment systems ensure quick and accurate setting of the rip fence. The easy to read rip scale is perfectly integrated into the saw table. The aluminium rip fence plate can be moved backwards to optimise the feed of workpieces. When working with narrow and thin cuts of wood or with the saw blade tilted, it can be inverted and used in the lying position.

On request: the digital crosscut stop. For accuracy to one tenth of a millimetre with large LED display.