|
PRODUCTS
Machine Range
|
|
 |
|
|
|
|
|
High-Speed Router Spindle
Optional – instead of the spindle moulder-Ø 30 mm: High speed spindle for router bits with 14,000 rpm (must be ordered before the machine is produced).
|
|
|
The FELDER 500 saw unit
Stable and compact saw unit built to last:
- Cutting height 102 mm with a 315 mm saw blade
- Double-sided support
- Smooth tilting action 0°–45°
- Support close to the saw blade on both sides
|
|
|
Precision sliding table-guiding system “X-Roll”
“X-Roll”, making a difference:
- Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact between bearings and guiding track, maximising precision over the lifetime of the machine. A 3 way dust protection system ensures clean, dust free guide rails. This is obtained through silicon wipers, brushes and concave tracks. Your X-Roll sliding table guidance system is backed by a 6 year factory guarantee.
- Clean, dust-free guide rails thanks to special silicon wipers.
- Hardened-steel tracks ensure accuracy and durability.
- 6 year guarantee.
|
|
|
Crosscut fence
The crosscut fence 1300 mm for crosscuts between +45° and –45° with 90° positive stop. The fence is quickly mounted onto the “X-Roll“ sliding table without the use of tools. The large crosscut stop provides an exact 90° position.
|
|
|
Stop scale
The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.
|
|
|
The FELDER 500 spindle moulder unit
Stable and compact spindle unit for long lasting precision:
- 100 mm maximum above table operating height
- Cast iron table opening 180 mm
- 4 speeds 3000, 6000, 8000 and 10,000 rpm
- Collet chuck for high speed router spindle at 14,000 rpm
- Smooth backwards tilt from 0° bis 45°
- Height adjustment with cast iron segment
|
|
|
Tenons and slots
The heavy duty Felder spindle unit ensures high precision when moulding and tennoning with heavy tooling.
|
|
|
Tilting bracket
The Felder device for tilting the feeder away means the power feeder always remains on the machine and can be used at any time with no difficulties.
|
|
|
Scoring unit
The "free from play" height and side adjusting scoring unit delivers a professional machining of laminated materials.
|
|
|
Rip fence
The rip fence is easily and smoothly adjustable, with a clamping mechanism which can be engaged with one hand.
The fine adjustment mechanism allows for precise measurements.
A rip capacity of 800 mm comes as standard with the option of upgrading to 1250 mm. The rip scale is easy to read and perfectly integrated into the machine body.
|
|
|
Spindle moulder fence “220”
Spindle moulder fence 220 for max. tooling diameter 220 mm
|
|
|
Your Felder spindle tilts “backward” with operational comfort and for the following reasons.
- Safe operation
- Suitable for any workpiece size
- Problem-free power feeder application
- Impeccably machined surface
- Optimal chip removal
|
|
|
to use a grooving cutter “Dado cutter”
The Felder 500 Series saw unit is fully compatible with Dado tooling. Thanks to a removable table insert and flanges, specialised Felder dado tooling can be used.
|
|
|
|
