|
PRODUCTS
Machine Range
|
|
 |
|
|
|
|
|
The Felder system cutterblock
With an 88 mm knife cutting radius, 2- or 4-knife cutterblock and the unique Felder system cutterblock technology, the Felder planing result reaches new heights.
Fifteen years ago, Felder introduced the double-sided disposable planer knife system. After each cutterblock knife change, start again with perfectly adjusted machine edged planer knives. Its much faster and more economical than the standard system.
Its mere child’s play to change the planer knives. In less than a few minutes you can change either the 2- or 4-knife cutterblock. The sharp Felder planer knives are instantly ready for action!
|
|
|
High-Speed Router Spindle
Optional – instead of the spindle moulder-Ø 30 mm: High speed spindle for router bits with 14,000 rpm (must be ordered before the machine is produced).
|
|
|
Planer knife adjustment without the use of tools; accurate to one tenth of a millimetre; comes as standard with your Felder machine!
The Felder-system cutterblock: 2- or 4-knife cutterblock, Quick and effortless knife change, The self-aligning knives, result in perfectly set knives each and every time, No resinous residuals on clamping bolts, Extremely quiet operation due to the enclosed design, Excellent durability of knife edges, Cost saving, thanks to the low price of planer blades
|
|
|
Perfect planing technology
The planer fence may be tilted to any angle between 90° and 45°. End stops are placed at 90° and 45°.
|
|
|
Open planer table
A space saving solution with optimum ergonomics: Planer tables tilt away from the user operating area, this ensures working with your Felder is as userfriendly as possible and also requires less workshop space.
|
|
|
The horizontal mortiser
The horizontal mortiser The horizontal mortiser is mounted on the planer side. The mortiser carriage can be fitted with a dowelling device, depending on your requirements.
|
|
|
The FELDER 500 saw unit
Stable and compact saw unit built to last:
- Cutting height 102 mm with a 315 mm saw blade
- Double-sided support
- Smooth tilting action 0°–45°
- Support close to the saw blade on both sides
|
|
|
Precision sliding table-guiding system “X-Roll”
“X-Roll”, making a difference:
- Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact between bearings and guiding track, maximising precision over the lifetime of the machine. A 3 way dust protection system ensures clean, dust free guide rails. This is obtained through silicon wipers, brushes and concave tracks. Your X-Roll sliding table guidance system is backed by a 6 year factory guarantee.
- Clean, dust-free guide rails thanks to special silicon wipers.
- Hardened-steel tracks ensure accuracy and durability.
- 6 year guarantee.
|
|
|
Crosscut fence
The crosscut fence 1300 mm for crosscuts between +45° and –45° with 90° positive stop. The fence is quickly mounted onto the “X-Roll“ sliding table without the use of tools. The large crosscut stop provides an exact 90° position.
|
|
|
Stop scale
The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.
|
|
|
The FELDER 500 spindle moulder unit
Stable and compact spindle unit for long lasting precision:
- 100 mm maximum above table operating height
- Cast iron table opening 180 mm
- 4 speeds 3000, 6000, 8000 and 10,000 rpm
- Collet chuck for high speed router spindle at 14,000 rpm
- Smooth backwards tilt from 0° bis 45°
- Height adjustment with cast iron segment
|
|
|
Scoring unit
The "free from play" height and side adjusting scoring unit delivers a professional machining of laminated materials.
|
|
|
Spindle moulder fence “220”
Spindle moulder fence 220 for max. tooling diameter 220 mm
|
|
|
Your Felder spindle tilts “backward” with operational comfort and for the following reasons.
- Safe operation
- Suitable for any workpiece size
- Problem-free power feeder application
- Impeccably machined surface
- Optimal chip removal
|
|
|
to use a grooving cutter “Dado cutter”
The Felder 500 Series saw unit is fully compatible with Dado tooling. Thanks to a removable table insert and flanges, specialised Felder dado tooling can be used.
|
|
|
|
