With an 88 mm knife cutting radius, 2- or 4-knife cutterblock and the unique Felder system cutterblock technology, the Felder planing result reaches new heights.
Fifteen years ago, Felder introduced the double-sided disposable planer knife system. After each cutterblock knife change, start again with perfectly adjusted machine edged planer knives. Its much faster and more economical than the standard system.
Its mere child’s play to change the planer knives. In less than a few minutes you can change either the 2- or 4-knife cutterblock. The sharp Felder planer knives are instantly ready for action!

Constructed completely out of cast iron, the new Felder 700 Series saw unit represents a new era of running stability and efficiency.
104 mm cutting height with a 315 mm saw blade
operates with groover up to 19.5 mm
Electrical height adjustment with LED display
Zero point tilt
Large dimensioned saw arbor with double bearing seats
Maximum energy transfer with the large Poly-V belt ­bearing area
Optimal extraction with the completely enclosed, below table extraction system
Precise height adjustment via precision linear guides
High precision double-sided support system
Tilt segment “Easy-Glide”:
- High durability
- Play-free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The electronically balanced saw arbor with dual bearing seat system is powered via a Poly-V belt. This combination results in an almost perfect transmission of power to the saw blade.

The Felder 700 Series saw unit is fully compatible with dado tooling. Thanks to removable flanges and table insert, the Felder designed, fully adjustable dado cutters can be used.

Continuous fence for parallel cuts: any dimension is possible, the fence remains in a fixed parallel position to the saw blade. You will always have the best possible bearing surface.

The advantages of the Felder quick change spindle system: Quick and easy change of spindle sizes; ability to interchange between 25, 30, 40, 50 mm, ¾’’, 1’’ and 1 ¼’’ diameter spindles; facility to insert a high speed router spindle for router bits; automatic repetition of settings for production work.

Do you find it tiresome always having to set up and remove the power feeder? Not with a Felder machine! You can leave your power feeder permanently mounted to your Felder machine and easily tilt it out of the way when not required.

Easy mortising: Easy operation with a single hand lever and safe clamping of any workpiece with an eccentric clamp.

4 spindles with trapezoidal threads guarantee accurate adjustment and high weight bearing capacity on the thicknessing table. The table height adjustment guideways (A+B) also stabilize the table against lateral movement particulary in the outfeed direction during thicknessing.

The crosscut fence 1100 mm for crosscuts between +45° and –45°. The fence can be attached to the sliding table without the use of tools. The end stop provides you with the exact 90° position.
The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.
The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This means the crosscut fence stop remains firmly in place, especially useful when crosscutting pre-mitred workpieces.

The 2600 mm long telescopic crosscut fence can be effortlessly adjusted from 90° to 45°. A mitre scale on the outrigger table allows for accurate adjustments. On request, we will fit your outrigger table with the precision mitre pin locating system. Locate your mitre angles accurately time and again!

Quick and accurate adjustment of cutting depth from the operator side of the infeed table.

Accurate adjustment. This is obtained with the patented planer table adjusting system, which works with lateral prismatic guide rails.

Its easy to change quickly from planing to thicknessing on your machine. 4 industrial springs are used to enable quick and easy planer table lifting.

Thicknessing accuracy to one tenth of a millimeter with the use of the handwheel and its integrated digital display. Max. Thicknessing height 254 mm.

The outrigger table enables the user to process large, heavy work pieces. Eight rollers guide the telescopic support arm, ensuring precision and stability.

The “precision mitre index system” on the outrigger table of the professional model allows you to freely select preset positioning stops at increments of 5°, but also at 22.5°, by means of the index locating pin from +45° to –45°.

Due to its efficient design and large dimension, the chip extraction hood is ready to deal with heavy chip loads.

Turn the control switch for quick adjustment and then fine tune with the push of a button. The LED display clearly shows the thicknessing table position.

Enter required dimension, press start and the thicknesser table will move accurately to the required position. Required and actual values are shown on LED displays. Further functions: incremental function and 4 programmable thicknesser table positions.

The scoring unit for cuttings in plastic laminated panels without tear outs. Backlash free height and lateral adjustment of the scoring saw blade, drive power of the industrial scoring unit 1.0 HP.

The Felder precision sliding table has been designed to accept maximum loads while retaining its smooth operation and accuracy. The “Monoprofile“ of the sliding table and base guarantees maximum ­torsional strength at every temperature. Through the “X“ formation of the roller bearings the load is optimally distributed to all sides. The “X-Roll“ guiding system and other numerous outstanding details are patented. Such precision and technology earns the right to the status of “World Class“.

With a completely new design, the Felder “700” spindle unit sets new standards!
Spindle operating height of up to 115 mm
Table opening: 230 mm
Quick-change system for moulder spindle
4 Operating speeds (3,500, 6,500, 8,000, 10,000 rpm)
Change of speed from front of machine
Fully compatible with high speed router spindle at 15,000 rpm
Tilts backwards 0° to 45°
Electrical height adjustment with LED display
High precision double-sided support system
Dovetail guidance system for height adjustment
Maximum energy transfer with the large Poly-V belt ­bearing area
Excellent vibration absorption from heavy cast iron unit
Tilt segment “Easy-Glide”:
- High durability
- Play-free tilt
- Unaffected by dust
- Completely maintenance free
- No lubrication required

The high speed router spindle is designed for router shaft diameters of Ø 6–16 mm at a running speed of 15,000 rpm.

The tilting segment on the Felder 700 series has one small but important detail: it is completely free of lubrication!

All Felder spindle moulders tilt 90°–45° as standard.

As soon as you begin working on your machine, you’ll see that your Felder’s range of applications is much wider than you might have expected and you save a lot on tools too. Using the hand wheel causes the whole moulder spindle unit to tilt to the requested angle easily and smoothly.

The “240“ spindle fence is standard equipment on the spindle moulders. The spindle fence can accommodate tooling to a maximum of 230 mm and has a fine adjustment on the spindle fence outfeed side. The integrated dust extraction connector allows for chip removal. The spindle table opening is 230 mm. That is your advantage when panel-raising ­­– the spindle tooling can be lowered under the table.

The MULTI-adjustment system allows quick adjustment to the workpiece diameter, also ensuring parallel running of the moulder fence.
- automatic repeat setting after removal of your fence
- parallel adjustments of the moulder fence
- Fast and fine adjustment
- measurement scale for depth of cut

More than 50 % of our clients now decide to take electric height adjustment for the moulder spindle.

Optimise your cutting speed to suit each and every job. Variable speed control, from 1500–11,000 rpm.

The Felder-system cutterblock: 2- or 4-knife cutterblock, Quick and effortless knife change, The self-aligning knives, result in perfectly set knives each and every time, No resinous residuals on clamping bolts, Extremely quiet operation due to the enclosed design, Excellent durability of knife edges, Cost saving, thanks to the low price of planer blades

2 Spring-loaded pressure bars prevent “vibrating” of very thin workpieces during thicknessing.

The heavy duty Felder spindle unit ensures high precision when moulding and tennoning with heavy tooling.

- Safe operation
- Suitable for any workpiece size
- Problem-free power feeder application
- Impeccably machined surface
- Optimal chip removal

“Power-Drive” gives you electronic height adjustment on the saw blade. Turn the control knob to adjust the blade height, displayed on a red LED display.