|
PRODUCTS
Machine Range
|
|
 |
|
|
|
|
|
Multi fine adjustment system
The MULTI-adjustment system allows quick adjustment to the workpiece diameter, also ensuring parallel running of the moulder fence.
- automatic repeat setting after removal of your fence
- parallel adjustments of the moulder fence
- fast and fine adjustment
- measurement scale for depth of cut
|
|
|
High-Speed Router Spindle
Optional – instead of the spindle moulder-Ø 30 mm: High speed spindle for router bits with 14,000 rpm (must be ordered before the machine is produced).
|
|
|
The FELDER 500 saw unit
Stable and compact saw unit built to last:
- Cutting height 102 mm with a 315 mm saw blade
- Double-sided support
- Smooth tilting action 0°–45°
- Support close to the saw blade on both sides
|
|
|
Precision sliding table-guiding system “X-Roll”
“X-Roll”, making a difference:
- Extremely smooth and precise sliding action! With the roller-bearing system there is no single point of contact between bearings and guiding track, maximising precision over the lifetime of the machine. A 3 way dust protection system ensures clean, dust free guide rails. This is obtained through silicon wipers, brushes and concave tracks. Your X-Roll sliding table guidance system is backed by a 6 year factory guarantee.
- Clean, dust-free guide rails thanks to special silicon wipers.
- Hardened-steel tracks ensure accuracy and durability.
- 6 year guarantee.
|
|
|
Crosscut fence
The crosscut fence 1300 mm for crosscuts between +45° and –45° with 90° positive stop. The fence is quickly mounted onto the “X-Roll“ sliding table without the use of tools. The large crosscut stop provides an exact 90° position.
|
|
|
Stop scale
The bevelled mitre scale with accurate readout is visible from the operating area and thus enables exact setting of the required crosscut value.
|
|
|
Precision mitre index system: exact angle precision
The double mitre system on the outrigger table with telescopic stop 2600 mm is standard for professional type machines.
It’s exactly the accessory that allows you to execute very accurate mitre cuts from +45° to –45° in a quick and easy way.
For those who want even more accurate settings we equip the outrigger table with the ”precision mitre index system“. With this you can select predrilled positioning stops in steps of 5°, but also at 22.5°, by means of the index locating pin from +45° to –45°.
|
|
|
The FELDER 500 spindle moulder unit
Stable and compact spindle unit for long lasting precision:
- 100 mm maximum above table operating height
- Cast iron table opening 180 mm
- 4 speeds 3000, 6000, 8000 and 10,000 rpm
- Collet chuck for high speed router spindle at 14,000 rpm
- Smooth backwards tilt from 0° bis 45°
- Height adjustment with cast iron segment
|
|
|
Multi-adjustment system for spindle moulder fence “240”
Professional equipment: Spindle fence "240" for max. tooling diameter 230 mm, MULTI adjustment system for spindle fence “240” enabling parallel alignment and quick setup
|
|
|
Tenons and slots
The heavy duty Felder spindle unit ensures high precision when moulding and tennoning with heavy tooling.
|
|
|
Tilting bracket
The Felder device for tilting the feeder away means the power feeder always remains on the machine and can be used at any time with no difficulties.
|
|
|
Scoring unit
The "free from play" height and side adjusting scoring unit delivers a professional machining of laminated materials.
|
|
|
Rip fence
The rip fence is easily and smoothly adjustable, with a clamping mechanism which can be engaged with one hand.
The fine adjustment mechanism allows for precise measurements.
A rip capacity of 800 mm comes as standard with the option of upgrading to 1250 mm. The rip scale is easy to read and perfectly integrated into the machine body.
|
|
|
The precision moulding fence “240”
The fence can hold tooling of up to 230 mm with fine adjustment of the out-feed fence from –5 to +25 mm. The dust extraction is carried out via an integrated extraction port at the rear. The table open diameter is 180 mm, a huge advantage when working with large tooling below the table.
|
|
|
Your Felder spindle tilts “backward” with operational comfort and for the following reasons.
- Safe operation
- Suitable for any workpiece size
- Problem-free power feeder application
- Impeccably machined surface
- Optimal chip removal
|
|
|
To use a grooving cutter “Dado cutter”
The Felder 500 Series saw unit is fully compatible with Dado tooling. Thanks to a removable table insert and flanges, specialised Felder dado tooling can be used.
|
|
|
|
